Getzschman provides water leak detection in Omaha for unexplained water use, wet spots, water sounds behind walls, and other signs of a hidden leak. Our plumbers inspect the plumbing, narrow down where the water is coming from, and locate the problem before discussing the repair.
Signs You Have a Hidden Water Leak
A leak does not always leave a visible puddle. Water can escape from plumbing behind walls, beneath floors, or underground before you see where it is coming from.
Signs to watch for include:
- A water bill that increases without a change in normal use
- Water running or dripping when faucets and appliances are off
- Damp drywall, ceiling stains, or wet flooring
- Musty odors in an area that is normally dry
- Warm spots on a floor
- Wet ground near a buried water line
- Water meter activity when the home is not using water
You can use the water meter for a basic leak check. Turn off faucets and water-using appliances, make sure toilets are not running, and note the meter reading. Do not use water for a short period, then check the meter again. A change means water is being used somewhere and needs further investigation.
If the meter changes but you cannot find the source, schedule leak detection instead of opening walls or floors based on a guess.
How Professional Leak Detection Works
Leak detection starts with the signs you have noticed. Tell our plumber about higher water use, stains, damp areas, unusual water sounds, or other changes and when they started.
We inspect accessible fixtures, plumbing connections, and other areas related to the problem. From there, we narrow down where the water loss is occurring and investigate the suspected area. The goal is to identify the leak location before repair work begins instead of opening multiple areas of the home looking for the source.
The exact process depends on where the leak is suspected. A leak beneath a floor requires a different investigation than water appearing below a sink or through a ceiling. Once the source is located, we explain what was found and what needs to be repaired.
Underground and Slab Leak Detection
Buried water lines and plumbing beneath a slab can leak without producing an obvious indoor drip. The first sign is usually unexplained water use, wet ground, water appearing near the foundation, or a warm area on the floor when a hot-water line is involved.
Underground leak detection focuses on narrowing down where a buried line is losing water before excavation or repair begins. For a suspected slab leak, our plumbers determine where the water appears to be coming from and identify the affected plumbing as closely as possible before discussing access and repair.
Do not assume every damp basement, wet area near a foundation, or high-water bill is caused by an underground pipe. Finding the source first keeps the repair focused on the actual problem.
What Happens After We Find the Leak
Once we locate the source, we explain where the leak is and what needs to be repaired. The repair depends on the failed plumbing and its location. An accessible pipe or connection requires different work than a damaged line beneath a floor or underground.
If the leak is releasing a large amount of water, cannot be contained, or is causing active damage, shut off the water when you can reach the valve safely and call an emergency plumber.
How Much Does Leak Detection Cost in Omaha?
Leak detection cost depends on where the suspected leak is located and what is required to find it. Accessibility, the location of the plumbing, the size of the area that needs to be investigated, and the work required to isolate the source can affect the final price.
Getzschman uses upfront pricing. The price is explained before approved work begins, and any repair needed after the leak is found is discussed separately.


Frequently Asked Questions
How do I know if I have a hidden water leak?
A higher water bill, meter activity when no water is being used, unexplained stains, damp flooring, musty odors, or water sounds behind walls can point to a hidden leak. Leak detection can locate the source when it is not visible.
How does professional leak detection work?
A plumber starts with the symptoms and checks accessible plumbing before narrowing the investigation to the suspected area. The specific process depends on the location and type of leak.
Can I check for a water leak using my water meter?
Yes. Turn off faucets and water-using appliances, make sure toilets are not running, and check the meter. Avoid using water for a short period and check it again. Continued meter activity means water is still being used somewhere.
How much does leak detection cost in Omaha?
The cost depends on the suspected location, accessibility, plumbing involved, and work required to isolate the leak. Getzschman explains the price before approved work begins.
Can a hidden water leak become an emergency?
Yes. A leak needs prompt attention if water is spreading quickly, cannot be contained, or is causing active damage. Shut off the water when it is safe to reach the valve and arrange service.




Technicians You Can Trust With Your House Keys®




Omaha's Most Trusted HVAC Installation and Repair Technicians




















